Chia Sẻ Unlock lumia 900 ok - Tiếng việt lumia 900 ok

Thảo luận trong 'Kỷ thuật phần mềm'

  1. 15
    44
    13
    tieuduongmobile

    tieuduongmobile Member TV-Vietnamfone

    Bài viết:
    15
    Đã được thích:
    44
    Unlock lumia 900 ok - Tiếng việt lumia 900 ok

    [​IMG]
    Phone Type : Lumia 900 RM-808, RM-823
    Unlock Type : Read PIN and PUK Unlock Codes
    Other Notes : Automatic Counter Reset (If Needed)
    ==========================================================

    1. Make sure JTAG Connection is 100% OK
    2. Always Disconnect the Phone BATTERY Flex Cable
    3. Connect RJ-45 JTAG Cable to ATF Box
    4. Connect USB Cable to Phone
    5. Use RESET JTAG button to check the JTAG Connection
    6. Click RESTORE BOOT button to Start Reading Unlock Codes
    ----------------------------------------------------------

    Resetting and Exploring JTAG chain...No Devices found in Chain!
    Resetting and Exploring JTAG chain...No Devices found in Chain!
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...Retry
    Resetting and Exploring JTAG chain...No Devices found in Chain!
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...ONFI Signature Not Found!
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...ONFI Signature Not Found!
    Resetting and Exploring JTAG chain...2 Device(s)
    Device #1 ID 0x100590E1 IR7
    Device #2 ID 0x203F10E1 IR4
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...ONFI Signature Not Found!
    Resetting and Exploring JTAG chain...2 Device(s)
    Device #1 ID 0x100590E1 IR7
    Device #2 ID 0x203F10E1 IR4
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...ONFI Signature Not Found!
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...Bad Answer from Loader 0x0, 0xDCC
    Waiting for Device Connection 20 second(s)...OK
    Resetting and Exploring JTAG chain...OK
    Halting Core...OK
    Initializing Device...OK
    Detecting ONFI #1 ID...MICRON MT29F1G08ABBDAH4, 128 MiB
    Sending Flash Loader...OK (73148 Op/Sec)
    Retrieving Unlock Codes...OK
    ===================================
    Service Provider Unlock Codes Found
    ===================================
    Level 1 PIN: 15399762 ACTIVE
    Level 1 PUK: 44265051 ACTIVE
    Level 2 PIN: 53301841
    Level 2 PUK: 51835916
    Level 3 PIN: 38467992
    Level 3 PUK: 07391902
    Level 4 PIN: 35014200
    Level 4 PUK: 07863103
    Level 5 PIN: 06551669
    Level 5 PUK: 13867626
    ===================================

    Reading Unlock Codes Done!


    pinout lumia 900


    [​IMG]

    repair boot

    [​IMG]

    eMMC Access Type: SECTOR MODE
    eMMC Supported Voltage Range:
    3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
    3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

    CID : FE014E4D4D43313647272C938EBA
    CSD : D04F01320F5903FFFFFFFFFF8A400001

    eMMC Boot Information
    Revision 1.5 (for MMC v4.41)
    BOOT PARTITION : USER AREA
    PARTITION ACCESS : R/W USER PARTITION
    PERM_BOOT_CFG_PROT : DISABLED
    PWR_BOOT_CFG_PROT : DISABLED
    BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
    RESET BUS WIDTH : ENABLED
    eMMC FirmW UPDATE : DISABLED
    EMMC CACHE SIZE : 0 KB
    SUPER PAGE SIZE : 3584 KB
    HC ERASE GROUP SIZE: 8192 KB
    USER AREA SIZE : 15636365312 BYTES
    BOOT PARTITION SIZE: 128 KB
    RPMB PARTITION SIZE: 128 KB

    Lumia 900 Detected

    eMMC Device Information
    Manufacturer ID: FE
    Device Type : Embedded BGA
    Application ID : 4E
    Product Name : MMC16G
    Product Rev : 2.7
    Product SN : 2C938EBA
    Manufactured : January 2012

    Card Specific Data
    CSD_STRUCTURE : Extended
    SPEC_VERS : Version 4.1/4.2/4.3
    TAAC : 300 ns
    TRANS_SPEED : 4000000 KHz
    READ_BL_LEN : 512 Bytes
    C_SIZE : HIGH CAPACITY
    WP_GRP_ENABLE : YES
    WRITE_BL_LEN : 512 Bytes
    CONTENT_PROT_APP : NO
    PERM_WRITE_PROTECT: NO
    TMP_WRITE_PROTECT : NO

    Extended CSD Saved:
    FE014E4D4D43313647272C938EBA_B07B571C.ext_csd
    Backup Directory:
    C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\

    Writing MBR...
    Write Success!
    Writing DBL...
    Write Success!
    Writing OSBL...
    Write Success!

    BOOT Images Written Successfully!


    flash room tiếng việt
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    [​IMG]

     
    Đang tải...
  2. 69
    236
    33
    ĐạtThànhmobile

    ĐạtThànhmobile Active Member TV-Vietnamfone

    Bài viết:
    69
    Đã được thích:
    236
    Lâu rùi không gặp , nội công thâm hậu hơn trước quá hả em :D
     
    locmobilebacninh, tieuduongmobiletnhan1981 thích bài này.
  3. 15
    44
    13
    tieuduongmobile

    tieuduongmobile Member TV-Vietnamfone

    Bài viết:
    15
    Đã được thích:
    44
    Cố gắng theo mấy a chứ :hongio::hongio::hongio:
     
    baongoclocmobilebacninh thích bài này.

Ủng hộ vietnamfone.com nào !

Chat
1
Chào bạn!
Bạn cần hỗ trợ gì ?
Gửi vài giây trước

Bắt đầu Chat


Chú ý: Bạn phải đăng nhập Facebook mới có thể trò chuyện.