Thông Tin Octopus Box LG v.2.2.3 - featuring LG K4 world's 1st support!

Thảo luận trong 'New Update'

  1. 153
    211
    43
    chicong2008

    chicong2008 Active Member TV-Vietnamfone

    Bài viết:
    153
    Đã được thích:
    211
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Octoplus/Octopus Box LG v.2.2.3 is out!We have added world's first support for different variants of LG K4 and support for other phones!

    Octoplus/Octopus Box LG Software v.2.2.3 Release Notes: Added support for the following models:
    - K120AR - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K120E - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K120F - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K120GT - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K120H - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K130 - added world's first Direct Unlock, Read Codes, Repair IMEI (A/B), Read/Write EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    - K130E - added world's first Direct Unlock, Read Codes, Repair IMEI (A/B), Read/Write EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    Added Reset Security operation for the following models:
    - D320, D320AG, D320AR, D320F, D320F8, D320G8, D320J8, D320N, D320TR
    Added Deactivate (McAfee) Kill Switch * operation for the following models:
    - LS990
    - VS985, VS985DU, VS985WDU
    All supported operations described in details in the manual ("Cable & Manual" button in Software)
    * In order to perform "Deactivate Kill Switch" operation, you need to do the following:

    1. Attach testpoint as shown on figure in manual, and connect phone with Micro USB cable (don't use USB hubs!).
      For some firmware versions, to put the phone into "Qualcomm-Mode", you can try to do the next: press and hold "Vol+" button and connect the phone directly to PC via micro USB cable
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn't installed a driver. Drivers are available in Installation Folder
    3. Release testpoint and press "Deactivate Kill Switch" button
    4. Follow Software instructions (prompts)
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Find out more at: <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    Đang tải...

Ủng hộ vietnamfone.com nào !

Chat
1
Chào bạn!
Bạn cần hỗ trợ gì ?
Gửi vài giây trước

Bắt đầu Chat


Chú ý: Bạn phải đăng nhập Facebook mới có thể trò chuyện.