Thông Tin MEDUSA jtag box update

Thảo luận trong 'New Update'

  1. 402
    1,230
    93
    Ngọc Quyền Gsm

    Ngọc Quyền Gsm Well-Known Member TV-Vietnamfone

    Bài viết:
    402
    Đã được thích:
    1,230
    Medusa Box v.2.4.4 is out!

    We have added boot repair via USB and small TP for:
    LG D150, D157F, D160, D160F, D160G, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Also added repair via JTAG interface for:
    Samsung SGH-T479B and ZTE V880G.

    Medusa Box v.2.4.4 Release Notes:
    - Added support for the following models:
    • LG D150 - added Dead Boot / Device Repair via USB
    • LG D157F - added Dead Boot Repair via USB
    • LG D160 - added Dead Boot / Device Repair via USB
    • LG D160F - added Dead Boot Repair via USB
    • LG D160G - added Dead Boot Repair via USB
    • Samsung SGH-T479B - added Dead Boot/Device Repair
    • ZTE V880G - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
    - All pinouts and Repair procedures are described in the manual ("Help" button in Software).

    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    [​IMG]



    [​IMG]




    [​IMG]

    Medusa - Ultimate Breakthrough in the Phone Repair!


    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    china_mobile, dolehoangtuan, pdatmobile2 others thích bài này.
    Đang tải...
  2. 402
    1,230
    93
    Ngọc Quyền Gsm

    Ngọc Quyền Gsm Well-Known Member TV-Vietnamfone

    Bài viết:
    402
    Đã được thích:
    1,230
    V2.4.5 - added Repair Boot via USB for LG D280N, LG D285, D315 and more!
    Medusa Box v.2.4.5 is out!

    We have added boot repair via USB and small TP for:
    LG D280N, D280G, LG D285, D285F, D285G, D315, D315K, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

    Medusa Box v.2.4.5 Release Notes:

    - Added support for the following models:
    • LG D280N - added Dead Boot Repair via USB
    • LG D280G - added Dead Boot Repair via USB
    • LG D285 - added Dead Boot / Device Repair via USB
    • LG D285F - added Dead Boot Repair via USB
    • LG D285G - added Dead Boot Repair via USB
    • LG D315 - added Dead Boot Repair via USB
    • LG D315K - added Dead Boot / Device Repair via USB
    - Added new Core ID (107180E1) for Qualcomm APQ8064

    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)


    To repair mentioned above devices via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    [​IMG]



    [​IMG]




    [​IMG]

    Medusa - Ultimate Breakthrough in the Phone Repair!


    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    china_mobile, dolehoangtuan, pdatmobile2 others thích bài này.
  3. 402
    1,230
    93
    Ngọc Quyền Gsm

    Ngọc Quyền Gsm Well-Known Member TV-Vietnamfone

    Bài viết:
    402
    Đã được thích:
    1,230
    V.2.4.6 - added boot repair via USB for LG D618, F240K, F240L, F240S and more!
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    Medusa Box v.2.4.6 is out!

    We have added boot repair via USB and small TP for:
    LG D618, F240K, F240L, F240S and via JTAG for Samsung GT-S5302!

    Medusa Box v.2.4.6 Release Notes:
    - Added support for the following models:

    • LG D618 - added Dead Boot/Device Repair via USB
    • LG F240K - added Dead Boot Repair via USB
    • LG F240L - added Dead Boot Repair via USB
    • LG F240S - added Dead Boot Repair via USB
    • Samsung GT-S5302 - added Dead Boot/Device Repair
    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair LG D618, F240K / L / S via USB, please follow the next three steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


    [​IMG]



    [​IMG]



    [​IMG]


    Medusa - Ultimate Breakthrough in the Phone Repair!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     ________________________________________
    WBR,
    Medusa Box Team

     
  4. 402
    1,230
    93
    Ngọc Quyền Gsm

    Ngọc Quyền Gsm Well-Known Member TV-Vietnamfone

    Bài viết:
    402
    Đã được thích:
    1,230
    V2.4.7 - added boot repair via USB and small TP for LG F310L and LG L-04E and more!
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    Medusa Box v.2.4.7 is out!

    We have added boot repair via USB and small TP for:
    LG F310L and LG L-04E and via JTAG for Samsung GT-I9210T and HTC Desire (PB99210)!

    Medusa Box v.2.4.7 Release Notes:

    - Added support for the following models:

    • LG F310L - added Dead Boot Repair via USB
    • LG L-04E - added Dead Boot Repair via USB
    • Samsung GT-I9210T - added Dead Boot/Device Repair
    • HTC Desire (PB99210) - added Dead Boot/Device Repair, Repair IMEI, Repair CID, Unlock (via Read Codes) (thanks to mr. mathew_di).
    - Improved connect procedure for Dead Boot Repair via USB for the following devices:
    • LG P710
    • LG P712
    • LG P713, P713GO, P713TR
    • LG P714
    • LG P715
    • LG P716
    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair F310L and LG L-04E via USB, do next steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    [​IMG]



    [​IMG]


    Medusa - Ultimate Breakthrough in the Phone Repair!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     ________________________________________
    WBR,
    Medusa Box Team

     
  5. 402
    1,230
    93
    Ngọc Quyền Gsm

    Ngọc Quyền Gsm Well-Known Member TV-Vietnamfone

    Bài viết:
    402
    Đã được thích:
    1,230
    V2.5.1 - added boot repair for LG F160LV/K/S, ZTE P752D, Huawei E171.
    Medusa Box v.2.5.1 is out!

    We have added Boot Repair via USB and small TP for LG Optimus LTE II F160LV, LG F160K, LG F160S
    and via JTAG for ZTE P752D (Vodafone Smart Chat V865) and Huawei E171 (CPU: HiSilicon HI6731)!


    Medusa Box v.2.5.1 Release Notes:
    - Added support for the following models:
    • LG F160LV - added Dead Boot/Device Repair via USB
    • LG F160K - added Dead Boot Repair via USB
    • LG F160S - added Dead Boot Repair via USB
    • Huawei E171 (CPU: HiSilicon HI6731) - added Dead Boot/Device Repair via JTAG
    • ZTE P752D - added Dead Boot/Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair mentioned above devices via USB, please follow the three next steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    [​IMG]



    [​IMG]


    Medusa - Ultimate Breakthrough in the Phone Repair!


    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    ________________________________________
    WBR,
    Medusa Box Team

     
  6. 402
    1,230
    93
    Ngọc Quyền Gsm

    Ngọc Quyền Gsm Well-Known Member TV-Vietnamfone

    Bài viết:
    402
    Đã được thích:
    1,230
    V2.5.7 - added Boot Repair via USB and small TP for LG E970, H220 and more!
    Medusa Box v.2.5.7 is out!

    We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

    Medusa Box v.2.5.7 Release Notes:
    - Added support for the following models:
    • LG E970 - added Dead Boot Repair via USB
    • LG H220 - added Dead Boot Repair via USB
    • Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
    • HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)

    To repair LG E970 and LG H220 via USB, please follow the three next steps:
    1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
      (do NOT use any USB hubs!)
    2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
      Drivers are in {Installation_Folder}\Driver\QHSUSB
    3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

    Medusa - Ultimate Breakthrough in the Phone Repair!

    [​IMG]





    [​IMG]

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     ________________________________________
    WBR,
    Medusa Box Team

     
  7. 402
    1,230
    93
    Ngọc Quyền Gsm

    Ngọc Quyền Gsm Well-Known Member TV-Vietnamfone

    Bài viết:
    402
    Đã được thích:
    1,230
    V2.5.8 - added Boot Repair for HTC One M7, Huawei Y300-0151 and Nokia Lumia 520!
    Medusa Box v.2.5.8 is out!

    We have added Boot Repair for HTC One M7 (PN07140), Huawei Y300-0151, Nokia Lumia 520 and Samsung GT-S6500D!

    Medusa Box v.2.5.8 Release Notes:
    - Added support for the following models:
    • HTC One M7 (PN07140) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
    • Huawei Y300-0151 - added Dead Boot / Device Repair via JTAG (thanks to Mr. DoctorChiguire)
    • Nokia Lumia 520 - added Dead Boot Repair via JTAG (thanks to Mr. mathew_di)
    • Samsung GT-S6500D - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
    - Added new Repair files for:
    • LG F160K
    • LG D855
    • Samsung SGH-I747 (Android 4.4.2) (thanks to Mr. nky777)
    - Improved Repair operation for LG D855
    - All pinouts and Repair procedures are described in the manual ("Help" button in Software)


    Medusa - Ultimate Breakthrough in the Phone Repair!


    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     ________________________________________
    WBR,
    Medusa Box Team

     
    china_mobile, dolehoangtuan, pdatmobile2 others thích bài này.
  8. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa Box v.2.5.9 is out!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Medusa Box v.2.5.9 is out!

    Here is the small update, while we are focused on bigger things.. We're not dead, we're not sleeping. We're working!
    Today we have added support for Samsung Galaxy S4 Mini, Samsung Galaxy Pocket Plus, Huawei Ascend Y200 and HTC Titan!


    Medusa Box v.2.5.9 Release Notes:

    - Added support for the following models:

    • Samsung SPH-L520 - added Dead Boot / Device Repair
    • Samsung GT-S5301L - added Dead Boot Repair
    • Huawei U8655-1 - added Dead Boot Repair
    • HTC Titan (PI39110) - added Dead Boot Repair, Repair IMEI (in Test Mode), Repair CID (in Test Mode)
    - Added new Core ID (ID: 706B40E1) for MSM8960 CPU
    - All pinouts and Repair procedures described in the manual ("Help" button in the Software)


    Medusa - Ultimate Breakthrough in the Phone Repair!


    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    baongocNgọc Quyền Gsm thích bài này.
  9. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.0.0 is out!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Medusa PRO v.1.0.0 is out!

    We are glad to introduce you brand new Medusa PRO Software! Medusa PRO Software inherits efficiency of Medusa Software complemented with increased capacities and new features.

    By launching Medusa PRO, we want to signal that we continuously offer high quality service and demanded solutions for today’s dynamic market. We hope that Medusa PRO will be as successful as our other projects.

    Medusa PRO v.1.0.0 Release Notes:

    - Medusa PRO - Main features:

    1. Full-featured professional-grade Medusa PRO software
    2. Easy and smart User Interface suitable for beginners and for experts
    3. Fast repair of target device with Smart-Repair-Files (SRF)
    4. SRF contains partition data and other necessary data
    5. Data in SRF are compressed (less to download)
    6. Built-in Partition Manager
    7. Simple per-partition operations (Read, Write, Erase, Edit) for target storage device
    8. Built-in Smart-Repair-File Constructor with Partition Manager for creating custom SRFs
    9. Built-in Download manager
    10. Devices with NAND, OneNAND, NOR and eMMC storage are supported via JTAG interface
    11. Devices with NAND, OneNAND and eMMC storage are supported via USB interface
    12. Up to 1 MB/s transfer speed via JTAG interface
    13. Windows 10 compatible

    - Medusa PRO - Supported Models via USB:
    • LG D620K- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D7227AR- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D724- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG E980- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H220- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LU6200- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG P715- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG P930- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG VS930- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files

    - Medusa PRO - Supported Models via JTAG:
    • Samsung GT-S5310T- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SGH-T746- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    - All pinouts and Repair procedures described in the manual ("Help" button in the Software)


    Medusa - Ultimate Breakthrough in the Phone Repair!


    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Medusa
    Pro alternative<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Medusa 2.6.1
    alternative<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Medusa 2.6.1
    lite alternative<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    tnhan1981 thích bài này.
  10. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.0.3 is out!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Medusa PRO v.1.0.3 is out!

    Dear Medusa Box community!

    Today we are proud to introduce you a so long awaited solution of damaged boot phones repair using MMC protocol connection, in cases when JTAG is disabled. Though this feature will be available only for upgraded box version -<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    Unfortunately current Medusa box hardware due to its limitations had to be reworked from scratch to gain more power and flexibility. Upgraded version features increased data transfer speeds, MMC protocol support and JTAG pinfinder!

    As you may have already noticed, the PRO software was released little bit earlier introducing some new outstanding features and now we are opening its full potential! More and more new phone models will be added in upcoming releases!

    For those who already enjoyed our product and wants to increase its possibilities, we have prepared an unbeated offer -<Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     at a reasonable price with Free Shipping included!

    P.S.: Octoplus Pro hardware in new, elegant design will be available soon[​IMG]

    P.P.S.: Regular Medusa hardware owners can still use all the new features, except those requiring eMMC connectivity. JTAG pinfinder is available for PRO hardware only as well. PRO owners will be able to use both PRO and "old" software versions.


    Medusa PRO v.1.0.3 Release Notes:

    - Added Support for direct eMMC repair of the phones. *

    - Added JTAG PIN finder. *

    - Added support for the following models via eMMC*:

    • LG D160- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D280n- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D285- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D380- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D410- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D838- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D851- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG E980- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG F440L- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H345- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H443- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H525n- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H811- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H635- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG L23- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS660- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS991- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS996- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG MS323- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG MS345- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG VS930- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I8190- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9070- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9300- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9308- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-N7108- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SGH-T989- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J700- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-N900- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-N9005- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    * Medusa PRO Box is required!
    - Added support for the following models via JTAG:
    • LG KH1300- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 300- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC Desire 600- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • HTC PM23300- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SGH-I577- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Sony Xperia LT26i- added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    - Added support for the following models via USB:
    • LG D802- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D855- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG F440L- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS980- added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files

    - All pinouts and Repair procedures described in the manual ("Help" button in the Software).

    Medusa - Ultimate Breakthrough in the Phone Repair!


    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    tnhan1981 thích bài này.
  11. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.0.5 is out!

    Medusa PRO v.1.0.5 Release Notes:
    - Added following features for work with eMMC:
    • Read/Write/Erase eMMC Boot area partition 1
    • Read/Write/Erase eMMC Boot area partition 2
    • Added output of detailed information about eMMC chip into the software log (CID, CSD, EXTCSD Info)
    • Added auto-backup of EXT_CSD data during the “Connect” operation into "EXT_CSD Backups" folder

    - Uploaded "Boot area partition 1" dumps/files for the following models into the Support Area:
    • Samsung GT-I9300
    • Samsung GT-N7108
    • LG D335

    - Added support for the following models via eMMC:
    • Samsung GT-I9250 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9300I - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G360G - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D631 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H815 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    - Updated help and pinouts in Smart Repair Files for the following model (please uninstall old SRF file, download and install new one):
    • LG LS996

    - Added software logs auto-backup into the "Logs" folder
    - Fixed problem with displaying Unicode characters in software log
    - Fixed issue with incorrect flash chip size detection (when flash chip size is less than 4GB)
    - Improved option to continue read into the same file from the moment of interruption, then “Read” operation was not completed
    (software was closed or stopped responding, PC suddenly shuts down, etc.)
    - Improved software stability
    - Some GUI changes
    - All pinouts and Repair procedures described in the manual ("Help" button in the Software)

    More info and discussion are <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    ____________________________________
    WBR,
    Medusa Box Team

     
    tnhan1981 thích bài này.
  12. 709
    2,222
    93
    trungvinh

    trungvinh TRƯỞNG BỐI TRƯỞNG BỐI

    Bài viết:
    709
    Đã được thích:
    2,222
    do đang sài nên phụ up

    Medusa Box v.1.0.6 Release Notes:
    • Added support for Qualcomm Snapdragon QSD8650 Mobile processor.
    • Added EasyRepair and Advanced modes for the following models:
      • LG SU630
      • LG KU6300
      • LG LU2300
      • <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

         

      • LG SH400
      • LG P506
      • LG P506GO
      • LG P505
      • LG P505R
      • LG P350G
      • Samsung SCH-W390
    • Improved support for Qualcomm MSM72XX and QSD8250 Mobile processors.
    To resurrect these models perform the following steps:

    • Solder JTAG cable to JTAG testpoints as explained in manual.
    • Make sure that correct model has been selected from model list.
    • Set Jtag speed to Auto (RTCK).
    • Select EasyRepair mode.
    • Press EasyRepair button and follow Wizard instructions.
    • After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
    • Desolder JTAG wires.
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    tnhan1981Phong NT thích bài này.
  13. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.0.7 is out!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Medusa PRO v.1.0.7 is out!

    We have added support for LG Optimus L7 II Dual, LG Optimus L9 II, LG L70 Dual, LG G2 Mini and LG G4s Dual!

    Medusa PRO v.1.0.7 Release Notes:
    - Added ability to editCID registry (Device identification register)for Samsung eMMC flash chips
    - Added ability to configure eMMC bus frequency
    - Added support for the following models via eMMC:

    • LG P715- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D605- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D325 (Hynix)- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D625- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H734- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    - Firmware of Medusa box has been updated! To update the firmware, please connect the box and only then run the Software
    - All pinouts and repair procedures described in the manual ("Help" button in the Software)

    Medusa - Ultimate Breakthrough in the Phone Repair!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    tnhan1981 thích bài này.
  14. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.0.8 is out!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     Medusa PRO v.1.0.8 is out!

    We have added support for Samsung SM-G360P, SM-G360T, GT-I9506, GT-S7275Y, GT-P5100 and LG H631!

    Medusa PRO v.1.0.8 Release Notes:

    - Added support for the following models via eMMC:

    • Samsung SM-G360P- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G360T- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9506- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-S7275Y- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-P5100- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H631- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    - All pinouts and repair procedures described in the manual ("Help" button in the Software)

    Medusa - Ultimate Breakthrough in the Phone Repair!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    tnhan1981 thích bài này.
  15. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.0.9 is out!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    Medusa PRO v.1.0.9 is out!

    We have added support for LG Optimus LTE, Samsung Galaxy S Plus, Samsung Galaxy Note 8.0 and Samsung Galaxy Tab 3 8.0!

    Medusa PRO v.1.0.9 Release Notes:
    - Added support for the following models via eMMC:

    • LG LU6200- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9001- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-N5100- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T311- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    - Added automatic resume of read, write, erase from the moment of interruption (if connection with the phone was lost during the process, etc.)
    - All pinouts and repair procedures described in the manual ("Help" button in the Software)

    Medusa - Ultimate Breakthrough in the Phone Repair!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    Ngọc Quyền Gsmtnhan1981 thích bài này.
  16. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.1.0 is out!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    Medusa PRO v.1.1.0 is out!

    We have added support for LG LS990, LG D724 and LG D821!

    Medusa PRO v.1.1.0 Release Notes:

    - Added support for the following models via eMMC:

    • LG LS990- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D724- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D821- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    - Added operation ETA information (Estimated Time of Accomplishment) to status bar
    - Reduced font size of log window messages
    - All pinouts and repair procedures described in the manual ("Help" button in the Software)

    Medusa - Ultimate Breakthrough in the Phone Repair!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    Ngọc Quyền Gsm thích bài này.
  17. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.1.2 is out!



    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

    Medusa PRO v.1.1.2 is out!

    We have added support for LG G3, Samsung Galaxy Note 10.1, Samsung Galaxy Mega 6.3 and Samsung Galaxy Ace 4!

    Medusa PRO v.1.1.2 Release Notes:
    - Added support for the following models via eMMC:

    • LG F460K - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-N8000 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9205 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SGH-I527M - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G357FZ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    - All pinouts and repair procedures described in the manual ("Help" button in the Software)

    Medusa - Ultimate Breakthrough in the Phone Repair!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
  18. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.1.3 is out!

    Dear Octoplus community,
    Today we are proud to introduce you a whole new built-in module - the 'Content Extractor'!
    This update drastically increases your servicing possibilities, offering such new features as restoring customers data from water drown phones, raw binary forensics and so on and so on, via JTAG or eMMC connection using simple graphical interface! Supporting most of existing file system formats and model-independent it brings a real boost to your repair shop [​IMG]


    Medusa PRO v.1.1.3 Release Notes:
    - Content Extractor – New Possibilities:
    1. View and save (extract) data (files, directories and volumes) directly from the device trough eMMC or/and JTAG interface
    2. View and save (extract) data (files, directories and volumes) from binary dumps (with Full Flash), which have been read from the device
    3. All popular file systems are supported: ext2, ext3, ext4, NTFS, FAT
    4. Ability to save selected files, directories and volumes on user’s hard drive
    5. Easy extract, view and save contacts
    6. Easy extract, view and save pictures
    7. Easy extract, view and SMS messages
    8. Preview graphic files (and their cache)
    9. Ability to work with pictures and media files using computer’s operation system
    10. Advanced search:
      - Search files in file systems or in binary dumps of the device
      - Search user’s contacts or SMS messages
      - Search file name of found pictures
    11. Easy and intuitive graphical user interface (GUI)

    You wanted – you got it! Please feel free to leave your suggestions and feedback <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     .
    __________________________________________
    WBR,
    Medusa Box Team

     
    Ngọc Quyền Gsm thích bài này.
  19. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.1.4. LG Factory Repair feature has been released

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    Medusa PRO v.1.1.4 is out!

    LG Factory Repair feature has been released!

    Medusa PRO v.1.1.4 Release Notes:

    • Added LG Factory Repair feature!
      You can try to repair LG devices via eMMC by using original LG firmware * («*.tot", "*.kdz" and "*.dz" versions of firmware are supported!).
      This feature can be useful in case, if you haven’t got the working device to prepare Repair file or haven’t got a chance to read out Full flash; or device you want to repair currently is not supported.

    • Fixed and improved Content Extractor:
      - Fixed GUI delay while analyzing contacts, SMS and pictures.
      - Fixed issue with contacts’ export to VCF file.
      - Increased stability of FS analysis.
      - Increased speed of FS reading and parsing directly from the device.

    • Added Win XP SP3 support (in test mode).

    • Made some GUI changes.

    • Updated repair file for LG LS991 (please re-download SRF file).

    • All pinouts and repair procedures described in the manual ("Help" button in the Software)

    * NOTE: not all versions of firmware contain necessary partitions for repairing! Try to write different firmware.

    Medusa - Ultimate Breakthrough in the Phone Repair!
     
  20. 793
    1,360
    93
    Minh Phương _tq

    Minh Phương _tq Support Box V.I.P

    Bài viết:
    793
    Đã được thích:
    1,360
    Medusa PRO v.1.1.5 is out! New Samsung phones has been added.
    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     
    Medusa PRO v.1.1.5 is out!

    We have added support for Samsung Galaxy Core Prime, Samsung Galaxy J1, Samsung Galaxy J1 Mini, Samsung Z1, Samsung Z3 Tizen and Samsung Galaxy Tab 4 8.0!

    Medusa PRO v.1.1.5 Release Notes:

    - Added support for the following models via eMMC:

    • Samsung SM-G360T1- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J100H- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J105H- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-Z130H- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-Z300H- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T337T- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    - AddedLG Factory Repairvia USB and JTAG interfaces ("*.tot", "*.kdz" and "*.dz" firmware versions are supported)

    - Added support for new type of KDZ firmware with "*.dz" files inside

    - All pinouts and repair procedures described in the manual ("Help" button in the Software)

    Medusa - Ultimate Breakthrough in the Phone Repair!

    <Bạn vui lòng đăng nhập hoặc đăng ký để xem được nội dung này!>

     

     
    Ngọc Quyền Gsm thích bài này.

Ủng hộ vietnamfone.com nào !


Bắt đầu Chat